Please read our guidance page about heritage designations.

Description

Reasons for Designation A standing cross is a free standing upright structure, usually of stone, mostly erected during the medieval period (mid 10th to mid 16th centuries AD). Standing crosses served a variety of functions. In churchyards they served as stations for outdoor processions, particularly in the observance of Palm Sunday. Elsewhere, standing crosses were used within settlements as places for preaching, public proclamation and penance, as well as defining rights of sanctuary. Standing crosses were also employed to mark boundaries between parishes, property, or settlements. A few crosses were erected to commemorate battles. Some crosses were linked to particular saints, whose support and protection their presence would have helped to invoke. Crosses in market places may have helped to validate transactions. After the Reformation, some crosses continued in use as foci for municipal or borough ceremonies, for example as places for official proclamations and announcements; some were the scenes of games or recreational activity. Standing crosses were distributed throughout England and are thought to have numbered in excess of 12,000. However, their survival since the Reformation has been variable, being much affected by local conditions, attitudes and religious sentiment. In particular, many cross-heads were destroyed by iconoclasts during the 16th and 17th centuries. Less than 2,000 medieval standing crosses, with or without cross-heads, are now thought to exist. The oldest and most basic form of standing cross is the monolith, a stone shaft often set directly in the ground without a base. The most common form is the stepped cross, in which the shaft is set in a socket stone and raised upon a flight of steps; this type of cross remained current from the 11th to 12th centuries until after the Reformation. Where the cross-head survives it may take a variety of forms, from a lantern-like structure to a crucifix; the more elaborate examples date from the 15th century. Much less common than stepped crosses are spire-shaped crosses, often composed of three or four receding stages with elaborate architectural decoration and/or sculptured figures; the most famous of these include the Eleanor crosses, erected by Edward I at the stopping places of the funeral cortege of his wife, who died in 1290. Also uncommon are the preaching crosses which were built in public places from the 13th century, typically in the cemeteries of religious communities and cathedrals, market places and wide thoroughfares; they include a stepped base, buttresses supporting a vaulted canopy, in turn carrying either a shaft and head or a pinnacled spire. Standing crosses contribute significantly to our understanding of medieval customs, both secular and religious, and to our knowledge of medieval parishes and settlement patterns. All crosses which survive as standing monuments, especially those which stand in or near their original location, are considered worthy of protection. Denton village cross is a good example of the carved base of a medieval standing cross, which survives in good condition. Situated on the site of the village green, it is believed to stand in or near its original position. The cross has not been restored, and limited disturbance of the area immediately surrounding the cross indicates that archaeological deposits relating to the monument's construction and use are likely to survive intact. Details The monument includes Denton village cross, a standing stone cross located in the front garden of Denton House, east of the parish church. The cross is believed to stand in or near its original position on the former village green. It is medieval in date and is constructed of limestone. The monument includes the base, comprising a socket-stone, and the shaft. The cross is Listed Grade II. The cross is located in a small paved area approximately 15m to the north west of Denton House. The base rests directly on the paving stones, and consists of a socket-stone measuring 0.92m square in section at the base and 0.38m high; the corners are moulded and chamfered to form a top of octagonal section. Each side of the socket-stone is carved with a shield at the centre of a quatrefoil. Into the centre of the socket-stone is set the remains of the shaft, a single stone 0.43m square in section at the base with chamfered corners rising in tapering octagonal section to its original height of 1.58m. The fragment terminates in a flat top upon which an upper stone was formerly placed.

External Links (1)

Sources (2)

Location

Related Monuments/Buildings (1)